Weight Kit for Fertilizer Spreaders, B300
EUR
996.00
€ 996,00
incl. 20 % VAT
Shipping costs:
|
Germany
Austria
other countries
|
free
free
|
delivery time 1-3 days
Art. No. AGW20001
Weighing technology for retrofitting fertilizer spreaders • turns your fertilizer spreader into a weighing spreader • ideal for controlling the amount of fertilizer applied • suitable for fertilizer spreaders with up to 2,000 kg capacity • load cells made of tool steel • standard weighing display B300 for mounting in the tractor cabin
Product Description
Turn your fertilizer spreader into a weighing spreader
By installing the weighing technology into your existing spreader, you can utilize the many advantages of a weighing spreader with your current machine.
Easily retrofitted to many spreader models
The weighing technology can be installed without much technical effort on many fertilizer spreader models, for example from the company Rauch.
Ideal also for smaller fertilizer spreaders
New fertilizer spreaders with weighing devices are often large and heavy. By retrofitting your existing fertilizer spreader, you can utilize modern technology even in your small spreader, allowing you to continue using your small maintenance tractor in the future.
Technical Data
Weighing Display:
• Robust, handheld display in ABS plastic housing
• Shock-resistant and splash-proof
• 6-digit LCD display with 20 mm high digits and LED backlight
• Power supply 12 to 24 V
• Operating temperature -10 to +50 °C
• Stabilized weight display for reading while driving
• Taring at the push of a button (zeroing of the empty device)
• Shock-resistant and splash-proof
• 6-digit LCD display with 20 mm high digits and LED backlight
• Power supply 12 to 24 V
• Operating temperature -10 to +50 °C
• Stabilized weight display for reading while driving
• Taring at the push of a button (zeroing of the empty device)
Load Cells:
• High-resolution shear force load cells, 3 mV/V, 350 Ohm
• Robust design made of nickel-plated tool steel
• Rated load per load cell 2,000 kg
• Safe overload 120%, breaking load 150%
• Accuracy +/-0.02%
• Cable length 4 m
• Waterproof according to protection class IP68
• Operating temperature -35 to +65 °C
• Temperature compensated -10 to +40 °C
• Robust design made of nickel-plated tool steel
• Rated load per load cell 2,000 kg
• Safe overload 120%, breaking load 150%
• Accuracy +/-0.02%
• Cable length 4 m
• Waterproof according to protection class IP68
• Operating temperature -35 to +65 °C
• Temperature compensated -10 to +40 °C
Connection Box:
• Waterproof connection box
• Terminal blocks for load cells and weighing signal cables
• Cable outlets with cable glands
• Terminal blocks for load cells and weighing signal cables
• Cable outlets with cable glands
Weighing Signal Cable:
• 4-wire cable 4 x 0.5 mm2
• Outer diameter 7.6 mm
• Special insulation
• UV-resistant
• Small bending radius
• Slip-resistant
• Outer diameter 7.6 mm
• Special insulation
• UV-resistant
• Small bending radius
• Slip-resistant
Scope of Delivery
Scope of Delivery:
• 1 weighing display
• 4 load cells made of tool steel
• 4 spacer plates
• 4 mounting plates
• 1 connection box
• 4 m connection cable for weighing display
• 1 waterproof screw connector for the connection of the weighing display
• 1 manual
• 4 load cells made of tool steel
• 4 spacer plates
• 4 mounting plates
• 1 connection box
• 4 m connection cable for weighing display
• 1 waterproof screw connector for the connection of the weighing display
• 1 manual
FAQ
How and where should the weighing technology be installed?
The load cells must be installed in such a way that after installation, the fertilizer container only rests on the 4 load cells. No force transmission between the frame and the container may occur at any other point.
Which fertilizer spreaders can the weighing technology be installed on?
The installation works best on spreaders that have the container mounted on its own frame, which is secured to the subframe with screws. This condition is met by many models from Rauch. Installation on models without their own container frame is much more difficult.
What is the installation effort?
The pictures on this page show the installation in a Rauch MDS fertilizer spreader, and depending on the conditions, installation is completed in about ½ to 1 day.
Are the mounting plates for the load cell installation included in the scope of delivery?
No, these are made differently depending on the installation type and are usually custom-made from flat steel.
Any further questions?
We will be happy to answer any further questions by phone at +43 2846 620.
Downloads
Documents:
0 Review(s)
No reviews available
