Sensor with magnet
Art. No. TRSENSOR1
my-agris sensor for evaluating working positions or switch states on machines • connectable to the my-agris sensor box
Product description
Detection of working position or other switch states
The sensor can detect switch states and display them directly in the visualization on the my-agris web interface.
Proof of working position at machine locations
By feeding the working position into the my-agris telemetry system, it can be shown for each measuring point along the route whether the machine was active or not.
Technical data
Technical data:
• Waterproof reed sensor
• 2-core connection cable
• Cable length 5 m
• Magnet with stainless steel mounting screw
• 2-core connection cable
• Cable length 5 m
• Magnet with stainless steel mounting screw
Scope of delivery
Scope of delivery:
• 1 sensor
• 1 magnet
• 1 mounting screw for magnet
• 1 magnet
• 1 mounting screw for magnet
FAQ
How is the sensor mounted?
Two states can be transmitted: the sensor is within the magnetic field or not. The sensor and the magnet must therefore be mounted so that in one state the sensor tip is within the magnetic field (e.g. when the snowplow is in working position), and in the other state the sensor tip is not in front of the magnet (e.g. when the snowplow is lifted).
Can the sensor signal be inverted?
Yes, this can be configured in the software.
Can several magnets be arranged side by side to enlarge the detection area?
Yes, but the magnets must be placed closely together.
More questions?
We will gladly answer further questions by phone at +43 2846 620.
Downloads
0 Review(s)
No reviews available
Customers also bought / were also interested in
